Controls
What the PULSARIZ 3,5D buttons do depends on the device mode: scanning, watching video, or in the menu.
Buttons
01- OKswitch the active band; confirm in menus
- ↓↑move between menu pages
- ←short pressdecrease frequency
- →short pressincrease frequency / skip signal
- ←holdturn off auto scan in the band; manual tuning
- →holdskip harmonics; return to auto search
Fine-tuning reception
02If the picture is weak or unstable, check a few neighbouring frequencies with short presses of ← / →. Harmonics can sit both before and after the main signal.
Use OK to switch bands and watch video from them. When the signal disappears, the device returns to auto scanning.
Skipping harmonics
03To skip the harmonics of a detected signal, press and hold the Right (→) button.
Menu pages
04- Display
- main display mode: AUTO / ON / OFF
- Brightness
- main display brightness
- Buzzer
- 80 dB audible alert: Short / Long / Off
- History
- frequencies where video was previously intercepted; cleared on restart
- Wi‑Fi
- firmware update in a browser
